53971 - A3F LED 932x30W-840 D2D VS L1565
ILLUMINOTECHNICAL - Luminous efficiency 100% (DLOR 100%, ULOR 0%). Initial luminous flux of the luminaire 8034 lm. Symmetric distribution. Installation Interdistance Transv.D = 1.31 x hu - Long.D = 1.31 x hu. Tabular UGR (CIE 117 - 4H-8H; S=0.25H; 70/50/20): RUG 19.5 - 20.7. Beam angle: 90° - 99°. Luminous efficacy 122 lm/W. Lifetime (L93/B10): 30000 h. (tq+25°C); Lifetime (L90/B10): 50000 h. (tq+25°C); Lifetime (L85/B10): 80000 h. (tq+25°C); Lifetime (L80/B10): 100000 h. (tq+25°C); Lifetime (L85/B10): 50000 h. (tq+35°C); Sudden decreased luminous flux after 50000 hours: 0% (C0). Photobiological safety in compliance with IEC/TR 62778: RG0 risk exempt, (IEC 62471). In compliance with IEC/EN 62722-2-1 - IEC/EN 62717 standards. - SOURCE - 2 linear LED modules 30W/840. Energy efficiency class (UE 2019/2020 - UE 2019/2015): C. CIE 13.3 Colour rendering index: CRI >80 (R9 <50%). IES TM-30 Fidelity Index: Rf = 84 Rg = 95. CCT nominal colour temperature 4000 K. Colour initial tolerance (MacAdam): SDCM 3. - MECHANICAL - Housing in AISI 304 stainless steel, pressed in one single piece. VS moulded anti-glare glass, non-combustible, single-piece perimeter frame in stainless steel. Methacrylate (PMMA) lenses with external flat surface. Stainless steel snap-lock clips for diffuser mounting (safety n° 4 per fixture). Luminaire with limited surface temperature. - D - (EN 60598-2-24); Dimensions: 1565x235 mm, height 105 mm. IP65 protection degree. Mechanical strength to impacts IK09 (10 joule). Glow-wire test resistance 960°C. - ELECTRICAL - Halogen Free DALI-2 DATI (Parts 251, 252, 253), PUSH-DIM, electronic wiring 230V-50/60Hz, power factor 0.97 at full load, THD <25%, constant output current, SELV, class I, 1 driver, 1 DALI addresse. Power of the luminaire 66 W. CE - IEC 60598-1 - EN 60598-1. SAFE FLICKER: PstLM=<1 and SVM=<0.4 (IEC TR 61547-1 and IEC TR 63158), to ensure a more comfortable and safe light. Luminaire compliant with EN 60598-2-22 for power supply from a centralised emergency system CPSS (Central Power Supply System), not incorporated in the luminaire - high risk areas excluded. The default power and flux are 100% in AC and 15% in DC. Ambient temperature from -20°C to +35°C. Temperature class T6 max 85°C. Quick connection via M20 3P connector with 9-13 mm tightening range. Relative humidity UR: <85%. - INSTALLATION - Ceiling / Suspended / Wall. - APPLICATIONS - Dry, dusty indoor environments, subject to occasional water splashes. Any environments except the ones where the luminaire materials are unsuitable. Industrial environments, warehouses, environments where security locks are required on all clips, e.g. prisons (on request). Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with laminated glass. Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process. - LIGHT MANAGEMENT - Recommended minimum setting: 10%. The luminaire, equipped with (DALI-2 DATI) driver, can be controlled manually with 3F Easy Dim technology or automatically/manually with wired or wireless DALI/D2D control systems. The D2D driver guarantees interoperability with other devices with the same certification by making the following information available:; Device Data (Part 251), Energy Report (Part 252), Diagnosis & Maintenance (Part 253). In electrical systems without a regulation system (manual or automatic) and DALI bus, a suitable jumper must be made on the DA-DA terminals of the appliance. - WARNING - Fixture not suitable for cold stores with an ambient temperature <0°C and/or relative humidity >85%. Luminaire designed for disposal/recycling at end-of-life. Replaceable (LED only) light source by a professional. Replaceable control gear by a professional.