A5226 - Kit LED 3F Cub - 150W-840 EP (VT)
To replace the 4x55W IP64 version. - ILLUMINOTECHNICAL - Luminous efficiency 100% (DLOR 100%, ULOR 0%). Initial luminous flux of the luminaire 21381 lm. Emergency luminaire luminous flux BLF 3.3%. Wide symmetric distribution. Installation Interdistance Transv.D = 1.09 x hu - Long.D = 1.19 x hu. Tabular UGR (CIE 117 - 4H-8H; S=0.25H; 70/50/20): RUG 25.3 - 25.4. Beam angle: 108° - 103°. Luminous efficacy 134 lm/W. Lifetime (L93/B10): 30000 h. (tq+25°C); Lifetime (L90/B10): 50000 h. (tq+25°C); Lifetime (L80/B10): 80000 h. (tq+25°C); Lifetime (L70/B10): 100000 h. (tq+25°C); Lifetime (L70/B10): 50000 h. (tq+25°C); Sudden decreased luminous flux after 50000 hours: 0% (C0). Photobiological safety in compliance with IEC/TR 62778: RG0 risk exempt, (IEC 62471). In compliance with IEC/EN 62722-2-1 - IEC/EN 62717 standards. - SOURCE - 6 linear LED modules 25W/840. Energy efficiency class (UE 2019/2020 - UE 2019/2015): C. CIE 13.3 Colour rendering index: CRI >80 (R9 <50%). IES TM-30 Fidelity Index: Rf = 84 Rg = 95. CCT nominal colour temperature 4000 K. Colour initial tolerance (MacAdam): SDCM 3. - MECHANICAL - Aluminium gear-tray unit. Tamper-proof closures (2 pieces) to replace the two existing ones. Luminaire with limited surface temperature. - D - (EN 60598-2-24); Dimensions: 680x680 mm, height 187 mm. Weight 4.1 kg. Glow-wire test resistance 960°C. - ELECTRICAL - Halogen Free electronic wiring 230V-50/60Hz, power factor 0.95, THD <25%, constant output current, class I, 2 driver. Single-circuit wiring. Power of the luminaire 160 W. CE - IEC 60598-1 - EN 60598-1. EP maintained emergency wiring on board, 1h duration, 24h recharge; compliant with EN 60598-2-22, excluding high risk areas. SAFE FLICKER: PstLM=<1 and SVM=<0.4 (IEC TR 61547-1 and IEC TR 63158), to ensure a more comfortable and safe light. Ambient temperature from +5°C to +25°C. Temperature class T6 max 85°C. Relative humidity UR: <85%. - INSTALLATION - Retrofit. Correct installation of the retrofit LED kit, compliant with EN 60598-1 and CE marked, inside the 3F Filippi - 3F Cub Fluorescent luminaires must be only performed by qualified personnel to ensure compliance with the national installation standards. - APPLICATIONS - Evaluate the use of moulded anti-glare glass according to the application. - WARNING - Fixture not suitable for cold stores with an ambient temperature <5°C and/or relative humidity >85%. In order to maintain the degree of protection of the device and for the purposes of validity of the guarantee of the new retrofit kits, it is imperative:; follow the safety and operating instructions described in the installation instructions; the use of the two self-drilling screws supplied (one for each driver), will perform the dual function of drilling the body and fixing the driver, while maintaining the fixture's degree of protection; the replacement of existing tamper-proof closures with new ones; clean the screen glass to improve efficiency; Luminaire designed for disposal/recycling at end-of-life. Replaceable (LED only) light source by a professional. Replaceable control gear by a professional.