A5234 - Kit LED 3F Cub CR - 150W-840 EP (VT)

To replace the 4x55W IP64 CR version.

ILLUMINOTECHNICAL
Luminous efficiency 100% (DLOR 100%, ULOR 0%).
Initial luminous flux of the luminaire 21381 lm.
Emergency luminaire luminous flux BLF 3.3%.
Wide symmetric distribution.
Installation Interdistance Transv.D = 1.09 x hu - Long.D = 1.19 x hu.
Tabular UGR (CIE 117 - 4H-8H; S=0.25H; 70/50/20): RUG 25.3 - 25.4.
Beam angle: 108° - 103°.
Luminous efficacy 134 lm/W.
Lifetime (L93/B10): 30000 h. (tq+25°C)
Lifetime (L90/B10): 50000 h. (tq+25°C)
Lifetime (L80/B10): 80000 h. (tq+25°C)
Lifetime (L70/B10): 100000 h. (tq+25°C)
Lifetime (L70/B10): 50000 h. (tq+25°C)
Sudden decreased luminous flux after 50000 hours: 0% (C0).
Photobiological safety in compliance with IEC/TR 62778: RG0 risk exempt, (IEC 62471).
In compliance with IEC/EN 62722-2-1 - IEC/EN 62717 standards.

SOURCE
6 linear LED modules 25W/840.
Energy efficiency class (UE 2019/2020 - UE 2019/2015): C.
CIE 13.3 Colour rendering index: CRI >80 (R9 <50%).
IES TM-30 Fidelity Index: Rf = 84 Rg = 95.
CCT nominal colour temperature 4000 K.
Colour initial tolerance (MacAdam): SDCM 3.

MECHANICAL
Aluminium gear-tray unit.
Tamper-proof closures (2 pieces) to replace the two existing ones.
Luminaire with limited surface temperature. - D - (EN 60598-2-24)
Dimensions: 680x680 mm, height 187 mm. Weight 4.1 kg.
Glow-wire test resistance 960°C.

ELECTRICAL
Halogen Free electronic wiring 230V-50/60Hz, power factor 0.95, THD <25%, constant output current, class I, 2 driver.
Single-circuit wiring.
Power of the luminaire 160 W.
CE - IEC 60598-1 - EN 60598-1.
EP maintained emergency wiring on board, 1h duration, 24h recharge; compliant with EN 60598-2-22, excluding high risk areas.
SAFE FLICKER: PstLM=<1 and SVM=<0.4 (IEC TR 61547-1 and IEC TR 63158), to ensure a more comfortable and safe light.
Ambient temperature from +5°C to +25°C.
Temperature class T6 max 85°C.
Relative humidity UR: <85%.

INSTALLATION
Retrofit.
Correct installation of the retrofit LED kit, compliant with EN 60598-1 and CE marked, inside the 3F Filippi - 3F Cub Fluorescent luminaires must be only performed by qualified personnel to ensure compliance with the national installation standards.

APPLICATIONS
Evaluate the use of moulded anti-glare glass according to the application.

WARNING
Fixture not suitable for cold stores with an ambient temperature <5°C and/or relative humidity >85%.
In order to maintain the degree of protection of the device and for the purposes of validity of the guarantee of the new retrofit kits, it is imperative:
follow the safety and operating instructions described in the installation instructions
the use of the two self-drilling screws supplied (one for each driver), will perform the dual function of drilling the body and fixing the driver, while maintaining the fixture's degree of protection
the replacement of existing tamper-proof closures with new ones
clean the screen glass to improve efficiency
Luminaire designed for disposal/recycling at end-of-life.
Replaceable (LED only) light source by a professional. Replaceable control gear by a professional.