57450 - 3F Rover D 35000-840 D2D CONC
Industrial luminaire with high light output and high luminous efficiency designed with the most innovative technologies for environments with temperature up to 50°C. - ILLUMINOTECHNICAL - Luminous efficiency 100% (DLOR 100%, ULOR 0%). Initial luminous flux of the luminaire 34271 lm. Concentrated elliptical distribution. Installation Interdistance Transv.D = 1.16 x hu - Long.D = 0.52 x hu. Tabular UGR (CIE 117 - 4H-8H; S=0.25H; 70/50/20): RUG 21 - 17.3. Beam angle: 71° - 30°. Luminous efficacy 170 lm/W. Lifetime (L93/B10): 30000 h. (tq+25°C); Lifetime (L90/B10): 50000 h. (tq+25°C); Lifetime (L85/B10): 80000 h. (tq+25°C); Lifetime (L80/B10): 100000 h. (tq+25°C); Lifetime (L85/B10): 50000 h. (tq+50°C); Sudden decreased luminous flux after 50000 hours: 0% (C0). Photobiological safety in compliance with IEC/TR 62778: RG0 risk exempt, (IEC 62471). In compliance with IEC/EN 62722-2-1 - IEC/EN 62717 standards. - SOURCE - 4 linear LED modules 50W/840. Source with special protection against aggressive chemically-volatile substances for standard LED technology. Energy efficiency class (UE 2019/2020 - UE 2019/2015): C. CIE 13.3 Colour rendering index: CRI >80 (R9 <50%). IES TM-30 Fidelity Index: Rf = 84 Rg = 95. CCT nominal colour temperature 4000 K. Colour initial tolerance (MacAdam): SDCM 3. - MECHANICAL - White epoxy-polyester powder-coated aluminium housing with thick plate for more effective heat dissipation. White polycarbonate cover. Polyurethane foam seal, ecological, anti-aging, installed using a continuous automatic process with no joints. Fixing bracket in stainless steel. 3F Lens lenses in transparent methacrylate (PMMA) with external flat surface, with high luminous efficiency. Luminaire with limited surface temperature. - D - (EN 60598-2-24); Dimensions: 575x795 mm, height 65 mm. Weight 9.65 kg. IP65 protection degree. Mechanical strength to impacts IK06 (1 joule). Glow-wire test resistance 650°C. - ELECTRICAL - Halogen Free DALI-2 DATI (Parts 251, 252, 253), PUSH-DIM, electronic wiring 230V-50/60Hz, power factor 0.97 at full load, THD <25%, constant output current, class I, 2 driver, 2 DALI addresses. Power of the luminaire 202 W. ENEC - CE. SAFE FLICKER: PstLM=<1 and SVM=<0.4 (IEC TR 61547-1 and IEC TR 63158), to ensure a more comfortable and safe light. Luminaire compliant with EN 60598-2-22 for power supply from a centralised emergency system CPSS (Central Power Supply System), not incorporated in the luminaire - high risk areas excluded. The default power and flux are 100% in AC and 15% in DC. Ambient temperature from -20°C to +50°C. Temperature class T6 max 85°C. Quick connection via M25 5P connector with 9-13 mm tightening range. Inspectable electrical unit. Relative humidity UR: <85%. - INSTALLATION - Ceiling / Suspended. All accessories dedicated to this product are available on the Catalog and on our website www.3F-Filippi.com. - APPLICATIONS - Suitable product for food production plants (HACCP), IFS (Food), BRC (GSFS Food). Dry, dusty indoor environments, subject to occasional water splashes. In commercial environments, exhibition and industrial areas, stores, open areas or with shelves. Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with polycarbonate lenses. - LIGHT MANAGEMENT - Recommended minimum setting: 10%. The luminaire, equipped with (DALI-2 DATI) driver, can be controlled manually with 3F Easy Dim technology or automatically/manually with wired or wireless DALI/D2D control systems. The D2D driver guarantees interoperability with other devices with the same certification by making the following information available:; Device Data (Part 251), Energy Report (Part 252), Diagnosis & Maintenance (Part 253). In electrical systems without a regulation system (manual or automatic) and DALI bus, a suitable jumper must be made on the DA-DA terminals of the appliance. - WARNING - Fixture not suitable for cold stores with an ambient temperature <0°C and/or relative humidity >85%. Luminaire designed for disposal/recycling at end-of-life. Replaceable (LED only) light source by a professional. Replaceable control gear by a professional.