56346 - 3F CUB LED 100W DALI CR SP
ILLUMINOTECHNICAL - Luminous efficiency 100% (DLOR 100%, ULOR 0%). Initial luminous flux of the luminaire 15495 lm. Symmetric wide direct distribution. Installation Interdistance Transv.D = 1.05 x hu - Long.D = 1.27 x hu. Tabular UGR (CIE 117 - 4H-8H; S=0.25H; 70/50/20): RUG 22.7 - 23.1. Beam angle: 88° - 95°. Luminous efficacy 143 lm/W. Lifetime (L93/B10): 30000 h. (tq+25°C); Lifetime (L90/B10): 50000 h. (tq+25°C); Lifetime (L80/B10): 80000 h. (tq+25°C); Lifetime (L70/B10): 100000 h. (tq+25°C); Lifetime (L70/B10): 50000 h. (tq+45°C); Sudden decreased luminous flux after 50000 hours: 0% (C0). Photobiological safety in compliance with IEC/TR 62778: RG0 risk exempt, (IEC 62471). In compliance with IEC/EN 62722-2-1 - IEC/EN 62717 standards. - SOURCE - 4 linear LED modules 25W/840. Energy efficiency class (UE 2019/2020 - UE 2019/2015): C. CIE 13.3 Colour rendering index: CRI >80 (R9 <50%). IES TM-30 Fidelity Index: Rf = 84 Rg = 95. CCT nominal colour temperature 4000 K. Colour initial tolerance (MacAdam): SDCM 3. - MECHANICAL - Housing with double casing in pressed aluminium, powder-coated in white epoxy-polyester, hinged opening. Quick connection in polycarbonate M20x1.5 cable gland for access to the terminal block. Ecologic anti-aging injected sealing gasket. Stainless steel clips. Total flow recuperator in specular aluminium, with superficial titanium-magnesium treatment, non-iridescent. Prismatic flat diffuser in multilenticular methacrylate (PMMA), anti-glare, prismatic outer surface, does not yellow or age. Fixing bracket for busbar or suspension in galvanised steel. Luminaire with limited surface temperature. - D - (EN 60598-2-24); Dimensions: 680x680 mm, height 187 mm. Weight 8.51 kg. IP64 protection degree. Mechanical strength to impacts IK08 (5 joule). Glow-wire test resistance 650°C. - ELECTRICAL - Halogen Free DALI-2 DATI (Parts 251, 252, 253), PUSH-DIM, electronic wiring 230V-50/60Hz, power factor 0.95 at full load, THD <25%, constant output current, class I, 1 driver, 1 DALI addresse. Power of the luminaire 108 W. ENEC - CE. SAFE FLICKER: PstLM=<1 and SVM=<0.4 (IEC TR 61547-1 and IEC TR 63158), to ensure a more comfortable and safe light. Luminaire compliant with EN 60598-2-22 for power supply from a centralised emergency system CPSS (Central Power Supply System), not incorporated in the luminaire - high risk areas excluded. The default power and flux are 100% in AC and 15% in DC. Ambient temperature from -20°C to +45°C. Temperature class T6 max 85°C. Quick connection. Relative humidity UR: <85%. - INSTALLATION - Ceiling / Suspended. All accessories dedicated to this product are available on the Catalog and on our website www.3F-Filippi.com. - APPLICATIONS - Suitable product for food production plants (HACCP), IFS (Food), BRC (GSFS Food). In commercial environments, exhibition and industrial areas, stores, open areas. - LIGHT MANAGEMENT - Recommended minimum setting: 10%. The luminaire, equipped with (DALI-2 DATI) driver, can be controlled manually with 3F Easy Dim technology or automatically/manually with wired or wireless DALI/D2D control systems. The D2D driver guarantees interoperability with other devices with the same certification by making the following information available:; Device Data (Part 251), Energy Report (Part 252), Diagnosis & Maintenance (Part 253). In electrical systems without a regulation system (manual or automatic) and DALI bus, a suitable jumper must be made on the DA-DA terminals of the appliance. - WARNING - Fixture not suitable for cold stores with an ambient temperature <0°C and/or relative humidity >85%. Luminaire designed for disposal/recycling at end-of-life. Replaceable (LED only) light source by a professional. Replaceable control gear by a professional.